Reference Projects – Electronics

The design consists of 2 cards, each with an FPGA. Each FPGA receives 6 1280 x 800 HD camera sensors ...
Read More

NOW has developed a test system with beds of needles for production test of six different PCBs in a product ...
Read More

Development of hardware and software for a wireless sensor unit in a calibration tool. The project included Bluetooth Low Energy, ...
Read More

We have developed several generations of boards to be used as design platforms in a line of security cameras. These ...
Read More

NOW has developed hardware to two 19 inch racks, where the electronics emulates the functionality of another equipment. The racks ...
Read More

A signal generator for a vector display is designed. It creates the X, Y deflection signals, and all other signals ...
Read More

An interface board for a ship system has been designed. The card has interfaces to other units – Ethernet, USB, ...
Read More

Monochrome CMOS camera för Weapon Alignment Equipment and Target Tracking Evaluation Systems Sensor: Aptina MT9M021 Resolution 768×576 Max frame rate ...
Read More

In one of our camera projects we developed the electronics for an extremely compact digital camera, just 20 x 110 ...
Read More

NOW has systematized and developed a family of printed circuit boards that distribute video over the Ethernet standard GigE Vision ...
Read More

A CE certification study was made on a resistance meter used for quality measurements in production. Applicable directives and standards ...
Read More

A circuit board for evaluation of IR sensors, previously developed by NOW, was redesigned into a flex-rigid PCB. The board ...
Read More

We have designed a burglar alarm consisting of a glass-break detector and control unit. The alarm was developed from tough ...
Read More

A small interface-board for noisy environments has been developed. It has an RS485 interface where you can control termination and ...
Read More

BitSim NOW has developed a test system with a bed of needles for final test and calibration of a circuit ...
Read More

BitSim NOW was contacted by a firm who had problems with one or their products, a measuring device in the ...
Read More

We have developed a high performance X-Ray camera. The camera reads in the X-ray information using hundreds of sensors in ...
Read More

We have developed a high resolution digital seismic acquisition system with sensors collecting and storing geo data. The detector is ...
Read More

In this customer driven project we were involved in developing the electronics for a tracker that is used to track ...
Read More

A circuit board for communication between different interfaces has been designed. The board has an ARM processor in the STM32F ...
Read More

We developed all the electronics and embedded SW used for a new type of rental bike system. The design consists ...
Read More

Controller board with multiple interfaces for DC motors, stepper motors, encoders, and position and photo sensors. The board is controlled ...
Read More

A small and compact general I/O board with outputs for power, analogue I/O:s for 0-20 mA or 0-28 V, digital ...
Read More

We have developed the graphics and video handling for a rear-view camera for buses, with our own IP, BADGE. A ...
Read More

We have developed a complete system for personal alarms for the elderly and others. What is unique about it is ...
Read More

Camera for electron microscope Monochrome CCD Sensor: ON Semi KAI-04070 Resolution: 2048×2048 Frame rate: Max 25 fps Pixel depth: 14 ...
Read More

An older relay armed motor driver PCB is replaced by a semiconductor one. Requirements from the customer was full compatibility ...
Read More

NOW has developed an RFID communication board, together with antennas. The board reads both half and full duplex RFID tags ...
Read More

Read-out electronics for high-performance stirling cooled IR-sensor Compact electronic design Flex-rigid PCB with five rigid parts Sensitive analog electronics 16 ...
Read More

Development of analog and digital precision electronics for a measurement instrument. The system includes up to twelve 24-bit measurement channels, ...
Read More

IR camera for vehicle night vision Bolometer based sensor Resolution 320×240 Max 25 bps frame rate 14 bit pixel depth ...
Read More

NOW has developed a platform with H.264 hardware encoding and decoding for full HD video. ·         Video streaming over IP/ethernet ...
Read More

Redesign of a data collection device for weapons systems calibration. The device has both analog and digital (HDLC, synchro-digital) inputs ...
Read More

BitSim NOW helped with addressing electrical safety and EMC-related problems in a measuring instrument for industrial processes. The customer’s external ...
Read More

BitSim NOW has developed a high-voltage AC/DC power supply. The unit is used to charge large capacitors, who are part ...
Read More

In this project we were asked to replace an old dashboard, with a traditional gauge, with a digital colour display ...
Read More

Within a very short time frame, BitSim NOW developed a vision system for inspection of bending. The system with two ...
Read More

BitSim NOW has developed two circuit boards for the evaluation of data communication over a two-wire, superimposed on the supply ...
Read More

An integrator specially developed for MEMS sensors was included in a preliminary study in order to find a replacement for ...
Read More

Feasability studies for a robust fire alarm, for use in for example an engine house, have been made. The product ...
Read More

BitSim NOW has developed a number of Camera-Link converter boxes, where video from different sources are converted to Camera-Link format ...
Read More

BitSim NOW has participated in the development of a professional film camera with full HD resolution (1920×1080) and 12-bit color ...
Read More

The basic idea was to design the smallest and lightest movie camera with no compromising on movie quality or recording ...
Read More

Designed parts of an RF circuit board designed for a radar environment simulation 0.5 to 2 GHz. The PCB contains ...
Read More

Development of hardware for a data storage board in ship systems. The board is controlled by an Atmel ARM9263 processor, ...
Read More

PCB design for collecting data from GPS et cetera in ship systems. The circuit board follows the customer’s compact build ...
Read More

BitSim NOW has developed vision functions for integration into the customer’s machine for measuring cooling channels etc. in tool steel ...
Read More

Development of hardware and software for video and audio collection systems in ships. The assignment involved multiple projects, since the ...
Read More

Design of an analog telephone (PSTN). The device is included in an audio/visual aid for persons with hearing loss. The ...
Read More

Design of a flow meter. The instrument measures the flow with the pressure-differential-method (linear plot). The user reads the flow ...
Read More

A complete CCD camera for military use, including mechanics, electronics and software, has been developed by BitSim NOW. The camera ...
Read More

A controller board for a 30 inch DVI flat panel. An Atmel microprocessor manages the display control and serial port ...
Read More

BitSim NOW has developed a vision system for inspecting dashboards. The system is built using DirectShow and Microsoft Visual Studio ...
Read More

Development of a video mixer that mixes images from two cameras and a computer – a tool for the visually ...
Read More

BitSim NOW participated in the development of a display for car dashboards. Requirements specification, selection of a custom made CMOS ...
Read More

Evaluation of analogue electronics for a temperature sensor -40 to +100 degrees, 4-20 mA ...
Read More

Vision system (Tile Quality Control, TQC) for difficult environments with Firewire cameras and audio analysis. The system is used for ...
Read More

BitSim NOW has developed a vision systems for quality control of paper paths in the paper industry. The system detects ...
Read More

Embedded 8.4@ TFT display with software, mechanics and image processing. Used in military operator systems under harsh environments for displaying ...
Read More

BitSim NOW has simulated and implemented EMC improvements on an infrared camera to meet the requirements of the automotive environment ...
Read More

Programming of FPGAs in the Xilinx 4000 series at the customer premises. The FPGAs were used for motor control and ...
Read More

Feasibility study where the ability to drive electronics via the inductive coupling to a power cable were examined. The difficulty ...
Read More

Temperature regulation of heating jackets used for example in the semiconductor industry. Control boards with temperature measurement using thermocouples (K ...
Read More

BitSim NOW has served as specialists help with a power supply board for a device in a German air fighter ...
Read More

BitSim NOW has developed a Linux-based frame grabber for a measurement application. The frame grabber has two camera inputs with ...
Read More

BitSim NOW has developed a controller board for an EL display. Among other things clock signals to the display are ...
Read More

BitSim NOW has developed an I/O board with several interfaces to solenoids, rotary encoders, linear position transducers and more. The ...
Read More

A control PCB for sputtering aggregates with monitoring of current, voltage, power and energy. The PCB contains a Spartan FPGA ...
Read More

BitSim NOW has developed an image processor for traffic tolls. It is a PCI board with two camera inputs for ...
Read More

Design of an integrator for laboratory use. The instrument integrates pulses down to 5 ns, this demands a high performance ...
Read More

BitSim NOW has contributed with more than 20 man-years at a customers with developing of an advanced display system, including ...
Read More

A system for reading and checking of labels. A line-scan camera scans the label as it passes by, and a ...
Read More

A system for testing of cell phones batteries. A test-head with spring pins connect to the battery, and a Windows ...
Read More

BitSim NOW has developed a video conversion equipment which performs conversions between different video formats, for a test station used ...
Read More

BitSim NOW has developed an CD inspection system, to be integrated in a machine for manufacturing CDs. BitSim NOW made ...
Read More

For production test of air-driven hand tools BitSim NOW has developed equipment for the measurement of torque and speed with ...
Read More

BitSim NOW has developed a 6 kW inverter for inductive heating. In the mission included simulation and calculations, design, schematic ...
Read More

BitSim NOW has designed all the electronics to a line-scan camera, four circuit boards. The CCD has eight outputs to ...
Read More

Development of a jitter attenuator to a military communication link. BitSim NOW designed the analog and digital electronics. Sampling, data ...
Read More

Development of a portable military memory module and its holder, for use in a tank. The mechanical design is very ...
Read More

BitSim NOW has developed several generations of a stimulus-generation equipment, for a test station used to test and develop printed ...
Read More

For personal protection in an assembly machine BitSim NOW has developed electronics working in the NIR range. Ten parallel channels ...
Read More

BitSim NOW has worked with a number of PCBs to an automatic mounting machine. The cooperation with the customer started ...
Read More

BitSim NOW has participated in the development of a CCD detector to an Echelle-spectrometer, with drive electronics to a Mpixel ...
Read More

BitSim NOW has developed a video generator for showing x-ray images. Three PCBs with in total 90 PAL circuits, one ...
Read More